Samsung DV17B9750 Series User Manual page 20

Heat pump dryer
Table of Contents

Advertisement

Available languages

Available languages

Installation
By using the drain pipe of the wash basin
A
CAUTION
• Place the other end (outlet) of the accessory hose about 70 mm away from a drain hole. Do not insert
the end (outlet) of the accessory hose into a sewer.
-
A sewer smell may flow into the dryer.
• Wring out excess water from items before putting them in the dryer.
-
Wet items may cause an unpleasant smell inside the dryer.
• Open the dryer door and the heat exchanger cover after completing a drying cycle to maintain the dryer
interior more hygienically.
• Run the Self Clean cycle if there is an unpleasant smell inside the dryer, or the "Self Clean needed"
message appears in the display.
20
English
Untitled-2 20
1. Assemble the hose connector (A), and attach it to the
end of the accessory hose as shown.
CAUTION
To prevent water leak, make sure to connect the hose
and the connector firmly.
2. Connect the hose adapter directly to the drain pipe of
the wash basin.
2023-07-18
5:11:10

Advertisement

Table of Contents
loading

Table of Contents