Mechanical Properties; Standards And Regulations - Phoenix Contact EV-T2M3SE12-3AC32A-0 Instructions Manual

EV-T2M3SE12-3AC32A-0,7M6,0E10 - Infrastructure
charging socket
1627779
https://www.phoenixcontact.com/us/products/1627779
Service life insertion cycles
Lock recognition
Mechanical emergency release
Ambient temperature (operation)
Cable length
Cable structure
Cable/line
Cable length
Cable structure

Mechanical properties

Mechanical data
Insertion/withdrawal cycles
Insertion force
Withdrawal force
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)
Ambient temperature (storage/transport)
Altitude

Standards and regulations

Standards
Standards/regulations
Mounting
Mounting type Infrastructure charging socket
Mounting type Protective cover
Max. wall thickness
Mounting hole diameter
> 10000 load cycles
available
available
-30 °C ... 50 °C
0.5 m
4 x 0.5 mm²
0.7 m (AC cables)
0.5 m (Locking actuator cables)
5x 6.0 mm² + 2x 0.5 mm²
> 10000
< 100 N
< 100 N
-30 °C ... 50 °C
-40 °C ... 80 °C
5000 m (above sea level)
IEC 62196-2
Rear panel mounting (0 to 90 degree frontal inclination possible)
Front mounting (only possible when the locking actuator is
removed (see EV-T2M3SE...E00 versions))
rear (available separately)
max. 50.00 mm (Rear panel mounting, normative maximum
specification for infrastructure plug)
max. 28.00 mm (Rear mounting, normative maximum
specification for infrastructure plug when using protective cover
1405217)
max. 10.00 mm (Front mounting, when using the locking
mechanism)
7.00 mm (ø)
Feb 25, 2024, 5:07 PM Page 3 (23)