Kit Components - Watts 957RPDA Series Installation Instructions Manual

Kit Components

The retrofit connection kit for installing and activating the flood
sensor includes the items shown below. If any item is missing,
speak with your account representative about ordering
code 88009421.
A. Flood sensor with mounting bolts
C. Cellular Gateway with mounting hardware
E. Ground wire
Requirements
• #2 Phillips screwdriver
• Wire stripper
• Suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure
• 120VAC, 60Hz, GFI-protected electrical outlet
• Ground wire running from the Cellular Gateway to
the ground point
• Cellular network connection
• Internet browser
NOTICE
• The connection kit is suitable for installation on the specified
valve series only.
• When installing an air gap, attach the air gap brackets directly
to the flood sensor.
B. Activation module with an 8' 4-conductor cable
D. 24V Power adapter
2