The Functions; Selecting And Setting Functions - Yamaha PSR-E423 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page.
When you locate a function you want to set up, simply select the function's display
name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1
Find the function you want to set in the
list that begins on pages 71, 72.
2
Press the [FUNCTION] button.
3
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function's dis-
play name appears in the display.
70
Owner's Manual
StyleVol
100
The selected function.
Transpos
00
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
The [+] and [-] buttons are used to make ON/OFF
type settings: [+] = ON, [-] = OFF.
In some cases the [+] button will initiate execu-
tion of the selected function, and the [-] will can-
cel the selection.
• Decrement Press simultane-
value by 1. ously to recall the
• Cancel default setting.
Some Function settings are stored in memory as soon
as they are changed. See "The Backup Parameters" on
page 50 for information on the function settings that
are stored on the instrument.
To restore all initial factor default settings perform the
"Backup Clear" procedure described in the "Initializa-
tion" section on page 50.
Direct
numeric entry.
• Increment
value by 1.
• Execute