Table of Contents
Advertisement
CLEANING
Always disconnect the speed sensor plug on the console before cleaning!
Clean the equipment with a damp cloth and mild detergent. Do not use abrasive
or corrosive cleaning agents.
Never directly spray liquid onto the equipment. Doing so could damage
the unit and any delicate electrical instruments in the console
Dry the equipment with a microfiber cloth. This product must be kept dry and
not exposed to direct sunlight.
Check components that are subject to wear and tear with frequent use and
tighten or replace these parts accordingly (knobs, resistance bands, pedals, etc)
Doing this increases the life and quality of the unit and assures, your safety.
Check your pedals before each ride to make sure they are tight and no
looseness is detected. If any looseness is detected, use your supplied
wrench to tighten firmly.
Use a silicone lubricant to fix areas where noises are present with
hardware. Never spray this lubricant into the housing of the bike, on
your pedals, or anywhere in and around the console.
MAINTENANCE
18
Advertisement
Table of Contents
