Specifications - Pioneer VSX-9500S Service Manual

9. SPECIFICATIONS
Amplifier section
[POWER AMP IN]
Continuous average power output of 125 watts*
per channel, min., at 8 ohms, from 29 Hz to 20,000
Hz with no more than 0.005 %** total harmonic
distortion (front); 30 watts* per channel, min., at
8 ohms, from 20 Hz to 20,000 Hz with no more
than 0.08 %** total harmonic distortion (rear); 30
watts*, min., at 8 ohms, from 20 Hz to 20,000 Hz
with no more than 0.08 %** total harmonic
distortion (center: VSX-9500S only).
Dynamic power (2 9/4 9/8 2)
Audio section
Damping Factor
1 kHz, 89. wee
Input (Sensitivity/impedance)
PHONO MM..
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3.
POWER AMP IN ..
Phono Overload Level (T.H.D. 0.08 %, 1000 Hz)
PHONO MM..
Frequency Response
PHONO MM..
-- 280 W/260 W/185 W
. 100
w+ 2.5 mV/47 kD
150 mV/47 ko
1 VW/A7 kQ
. 20 Hz to 20,000 Hz +0.3 dB
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3....... 5 Hz to 100,000 Hz*$ dB
Output (Level/impedance)
TAPE 1/DAT REC, TAPE 2 REC, VCR 1 OUT,
150 mV/2.2 kf
+ 1V/2209
+6 dB (100 Hz)
+3 dB (10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO MM
CD, LINE, T, = Vi
VDP/CDV, VCR 1, VCR 2, VCR 3.
VSX-S500S ,V 'Ss00s
VIDEO Section
Input (Sensitivity/impedance)
VCR 1, VCR 2, VCR 3, VDP/CDV, TV, VIDEO,
ADAPTOR . sd
Output (Level/impedance)
VCR 1, VCR 2, ADAPTOR, MONITOR ....
Frequency Responce
VCR 1, VCR 2, VCR 3, VDP/CDV, TV, VIDEO,
1 Vp-p/75 29
«+. 1 Vp-p/75 2
ADAPTOR MONITOR 5 Hz — 10 MHz*$ dB
Signal-to-Noise Ratio .. 55 dB
Cross Talk . 55 dB (3.58 MHz)
Enhancer .. £3 dB (2 MHz)
[S terminals]
Input (Sensitivity/impedance)
VCR 1, VCR 2, VDP/CDV ... ... Luminance signal: 1 Vp-p/75 2
Color difference signal: 0.286 Vp-p/75 2
Output (Level/imipedance)
VCR 1, VCR 2, TO MONITOR TV. Luminance signal: 1 Vp-p/75 2
Color difference signal: 0.286 Vp-p/75 2
Frequency response
Luminance signal ..
Signal-to-Noise Ratio
10 Hz to 10 MHz, *$dB
Luminance signal .. 55 dB
Cross talk 55 dB (3.58 MHz)
Surround section
Input (Sensitivity/impedance}
REAR POWER AMP IN 1 V/A7 ka
CENTER POWER AMP 1 V/47 ko
Output (Level/impedance)
REAR PRE AMP OUT... - 1V/A70 0
CENTER PRE AMP OUT
VSX-95008 . 1/470 0
VSX-7500S . . 2/470 2
87