Pioneer VSX-9500S Service Manual page 54

TAPE 1/DAT jacks
Connect a DAT (digital audio tape deck) or your primary analog cassette
deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck or DAT should
be connected to the REC side of the TAPE 1/DAT jack on the receiver
with a pin plug connecting cord.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck or DAT to the PLAY
side of the TAPE 1/DAT jack on the receiver with a pin plug connecting
cord.
@® TAPE 2 jacks
Connect a second cassette deck to these jacks.
Connection for Recording
The tape recording jack (TAPE REC) on the cassette deck should be
connected to the REC side of the TAPE 2 jack on the receiver with a
pin plug connecting cord.
Connection for Playback
Connect the TAPE PLAY jack on the cassette deck to the PLAY side
of the TAPE 2 jack on the receiver with a pin plug connecting cord.
VIDEO jacks (input)
Connect the output jacks of video components.
For example, connect a playback-only VCR or a video camera.
@ TV jacks (input)
Use these jacks if wish to connect a TV tuner having both video and
audio outputs.
IVIDEO IN}
Connect the TV tuner's VIDEO OUTPUT to this jack.
[AUDIO IN (L, Ri]
Connect the TV tuner's AUDIO OUTPUT to these jacks.
VDP/CDV jacks
IVIDEO IN)
When watching the video image from a LD player (VDP/CDV player)
{or a VCR used for playback), connect its VIDEO OUTPUT jack here.
[AUDIO IN (L,R)}
When playing back the audio channel from a LD player (VDP/CDV
player) or a VCR for playback, connect its AUDIO OUTPUT jacks here.
VCR 1 jacks
{VIDEO IN)
To receive the video image from VCR 1 used for playing, connect its
VIDEO OUTPUT jack here.
{AUDIO IN (L, R)]
To receive the audio channels from VCR 1 used for playing, connect
its AUDIO OUTPUT jacks here.
{VIDEO OUT)
When copying program material from the video component connected
to the VCR 2, VCR 3, VIDEO, VDP/CDV or TV jacks, connect to the
VIDEO INPUT jack of the VCR 1 used for recording.
{AUDIO OUT IL, RI}
When copying program material from the video component connected
to the VCR 2, VCR 3, VIDEO, VDP/CDV or TV jacks, or when recording
music from anaudio component source, connect to the AUDIO INPUT
jacks of the VCR 1 used for recording.
@ VCR 2jacks
[VIDEO IN}
To receive the video image from VCR 2 used for playing, connect its
VIDEO OUTPUT jack here.
[AUDIO IN (L, RI)
To receive the audio channels from VCR 2 used for playing, connect
its AUDIO OUTPUT jacks here.
80
IVIDEO OUT)
[AUDIO OUT (L, R}]
@ VCR 3 input jacks
[VIDEO IN}
[AUDIO IN (L, R))
@ FRONT AMP jacks
(PRE-OUT}
(POWER IN]
@ FRONT SPEAKERS terminals
A: Connect to a first set of speakers.
B: Connect to a second set of speakers.
Position position
AorB_Y Y_aors;
42 TO LESS THAN 82 82 OR MORE
A + B; 82 OR MORE
|_| When using one pair of speakers:
I] When using two pairs of speakers:
NOTE:
@ REAR SPEAKERS terminals
Connect the rear speakers to these terminals.
Speaker impedance
NOTE:
AC Power cord
Connect to AC wall socket.