Water Tank - Samsung DV9 CGC Series Instructions Manual

Heat pump dryer
Table of Contents

Advertisement

CAUTION
Clean the lint filter after each load. Otherwise, the drying performance may decrease.
Do not operate the dryer without the inner filter inside the outer filter.
Using the dryer with a wet lint filter may cause mold, bad odors, or a decrease in drying
performance.

Water tank

To avoid leaks, empty the water tank after every load.
A
B
CAUTION
The water tank can be heavy. Pull out the water tank slowly and at level using both hands.
DC68-04480M-00_IB_Dryer_DV5000C_D.LED_EN.indd 19
DC68-04480M-00_IB_Dryer_DV5000C_D.LED_EN.indd 19
5. Put the inner filter into the outer filter, and then
reinsert the lint filter into the original position.
1. Using both hands, pull the water tank (A)
forward to remove.
2. Empty the water through the drain hole (B) and
place the water tank back into place.
NOTE
If the dryer displays the "5C" information code and
stops while drying is in progress, empty the water
tank and press
Start/Pause. The "5C" information
code will disappear, and the dryer will resume
drying.
English
19
2023/8/8 10:49:03
2023/8/8 10:49:03

Advertisement

Table of Contents
loading

Table of Contents