Maintenance; Emptying The Water Tank ( ) - Samsung DV CGC2 Series User Manual

Heat pump dryer
Table of Contents

Advertisement

Maintenance

Emptying the water tank (
Empty the water tank after each use to prevent leaks.
A
NOTE
If the dryer displays the "5C" information code and stops while drying is in progress, empty the water tank
and press
Start/Pause. The "5C" information code will disappear, and the dryer will resume drying.
Dryer_DV5000C_WEB_English.indd 37
)
B
1. Remove the water tank (A) from the dryer.
-
Pull the water tank handle with one hand until the
tank is halfway out.
-
Once the water tank is halfway out, support the
bottom of the tank with the other hand and pull it
slowly with both hands.
CAUTION
• The water tank is heavy. Slowly remove the water
tank using both hands while keeping the tank at a
level.
• Be careful when removing the full water tank. It is
very heavy and can cause injury if you drop it.
2. Empty the water through the drain hole (B), and then
clean inside the water tank.
-
Mix some neutral detergent in lukewarm water.
Fill the water tank with the mixture through the
drain hole (B) and leave it for 30 minutes. Then,
rinse the tank with clean water and completely
dry it.
3. Place the water tank back into place.
English 37
2023/7/13 14:51:44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv cgc0 seriesDv81cgc2b0aeen

Table of Contents