Table of Contents
Advertisement
Turn off the oven and wait until
it is cold.
Step 1
Set the function:
Step 2
,
- press to set the cleaning mode.
Option
P1
Step 3
- press to start the cleaning.
Step 4
After cleaning, turn the knob for the heating functions to the off position.
During the cleaning the oven lamp is off.
When the oven is at the set temperature, the door locks. Until the door unlocks the display shows: the bars of the
heat indicator,
.
Turn off the oven and wait until it
is cold.
12.4 Cleaning reminder
The oven reminds you when to clean the
oven with: Pyrolysis.
Pyrolysis - flashes in the display for 10 sec
after each activation and deactivation of the
oven.
12.5 How to remove and install: Door
The oven door has four glass panels. You can remove the oven door and the internal glass
panels to clean them. Read the whole "Removing and installing door" instruction before you
remove the glass panels.
CAUTION!
Do not use the oven without the glass panels.
20
ENGLISH
Before the Pyrolysis:
Remove all accessories.
.
- flashes.
Cleaning mode
Light cleaning
When the cleaning ends:
Clean the cavity with a soft cloth.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Remove the residue from the bottom of
,
- press at the same time to turn off the
reminder.
a mild detergent.
Duration
2 h
the cavity.
Advertisement
Table of Contents
