Page 1
User Manual WISE-2460P Modbus Smart Vibration Sensor(8KHz@1-axis)
Page 2
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
Page 3
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information.
WISE-2460P is a robust RS-485 smart vibration sensor integrated with an ARM Cor- tex-H7 processor, 1-axis high detection range accelerometer and temperature sen- sor. This powerful computing device balances the bandwidth between edge devices and the application service on the user side.
Go to WISE-2460P website, and download, install WISE Studio software on user’s PC Connect WISE-2460P to PC via a RS-485 to USB converter, and open WISE Studio software. If user’s serial port on the left side is active, please click “Go to Configuration”...
User can click the “Device Info” on the top to check the Device Name, Firmware version, Boot loader Version and I/O Board firmware version. User can also goes to the information page and check more device information in detail, like serial number of this device, sensitivity setting of this WISE-2460P, etc. WISE-2460P User Manual...
WISE-2460P Device System Configuration WISE-2460P has 4 sub-pages for device configuration setting, which are Time, Con- trol, RS-485 and Firmware. Time & Date: setting the RTC on WISE-2460P Control: can reset the WISE-2460P back to default or force reboot it.
WISE-2460P Sensor configuration and value output verification WISE-2460P has 2 sub-pages for sensor setting, which are Status and Configura- tion. Status: check the output value from WISE-2460P. Detail values definition and default settings are below for reference. Table 2.1: Status...
Page 16
– Sensor detection: measurement trigger level(unit:g) and delay/anaylized count setting. Trigger level means the sensor on WISE-2460P will start to measure the data only when the vibration value is over trigger level, and due to the shock may be unstable at the beginning, so user can set a delay counts and analyzed detection counts to make sure the measurement data from WISE-2460P is exactly what user wants.
Page 17
0.5 means to detect the range between (main RPM * 2) ±(main RPM * 0.5) b. Band: frequency: set the exactly frequency range directly. Vibration alarm and range: warning limit and error setting of temperature value. WISE-2460P User Manual...
WISE-2460P Device Data Logger configuration WISE-2460P has 3 sub-pages for data logger function, which are Data Configuration, Logger Configuration and Local Data Query. Data Configuration: enable/disable the even log items. Logger Configuration: enable/disable the log function. Local Data Query: Query log data from WISE-2410 and check these data on WISE Studio directly.
User can also restore default sensitivity by click “Reset Sensitivity” button. Get time-domain raw data from WISE-2460P User can get the real time time-domain raw data from WISE-2460P directly. It will take around 30s for getting one raw data from WISE-2460P. User can refer following process for getting the data on WISE Studio.
Page 20
Zoom in directly on the dashboard. Can reset the zoom level via zoom reset but- ton. User can enable “Mark Chart Point” function. It’s more easier for reading the data on WISE Studio dashboard Figure 2.1 Get raw data - dashboard WISE-2460P User Manual...
Page 21
Figure 2.2 Get raw data - dashboard with mark WISE-2460P User Manual...
QC_Power in Band 07 (*1) Read 40064 0 (Z) QC_Power in Band 08 (*1) Read 40065 0 (Z) QC_Power in Band 09 (*1) Read 40066 0 (Z) QC_Power in Band 10 (*1) Read 40075 QC_Temperature (*1) Read WISE-2460P User Manual...
Page 27
Table 3.3: WISE-2460P Configuration Settings Modbus Address 46061 Band Mode 46062 Band Magnification 46063~46064 Band Order/Start Band 06 46065~46066 Band Bandwidth/End 46067~46068 Warning 46069~46070 Alarm 46071 Band Mode 46072 Band Magnification 46073~46074 Band Order/Start Band 07 46075~46076 Band Bandwidth/End 46077~46078...
Advantech pairs WISE-2460P with WISE-4051 as a package for wireless applica- tions. Once user finished the physical connection between WISE-2460P and WISE- 4051. They can login WISE-4051 web and go to “Advantech Sensor” page for quick configuration setup. Please go to IO Status > COM1 > Modbus/RTU Configuration > Advantech Sensor.
2460P via WISE-4051 remotely. User can open WISE Studio and click “Query Raw Data” button on the top side to initial this function. The rest operation process are as same as WISE-2460P. User can refer “Get time- domain raw data from WISE-2460P” session for more detail.