Advertisement
For wood studs: Using the stud finder, locate your two wood studs. Hold the wall
plate (A) against the wall at the desired position. Next, using a pencil, mark 4 hole
locations. Pre-drill the 4 marked holes using a 7/32" drill bit to a depth of 2.5". Attach
the wall plate (A) to the wall with lag bolts
NEVER USE ANCHOR
CAUTION: The wood stud minimum size is 2x4 inches, and the surface covering
can't be more than 5/8 inches. Drill hole on the wood stud center line.
Centre line
Stud
Finder
7/32"
(5.5mm)
2.5"
(65mm)
FOR WOOD STUDS ASSEMBLY
02
16"/24"
Figure 3 (keep the wall plate level)
. (Figure 3)
01
Socket Wrench
1/2" (13mm)
Mounting
Template
Level
A
01
④
Advertisement
