Advertisement
Step 2 ： Install wall plate (A) on the wall.
For concrete wall: Remove the plaster board on the surface of the concrete wall.
Hold the wall plate (A) against the concrete wall at the desired position. Next, using
a pencil, mark 4 hole locations. Drill holes according to pencil marks using a 3/8"
size drill bit to a depth of 2.5". Insert concrete anchors
into holes. You may need
02
to use a hammer to lightly tap the concrete anchors into the wall. Then attach the
wall plate (A) to the wall with lag bolts
. (Figure 2)
01
CAUTION: The concrete wall must be a minimum thickness of 5.5 inches and the
surface covering can't be more than 3/8 inches.
2.5"
CAUTION: Do not use on concrete block.
(65mm)
3/8"
(10mm)
Mounting
Template
Level
02
A
01
Socket Wrench
1/2" (13mm)
Figure 2 (keep the wall plate level)
③
Advertisement
