Related Manuals for Helios HTL64
Summary of Contents for Helios HTL64
- Page 1 ASSEMBLY INSTRUCTION Model : HTL64 CAUTION Please read this instruction carefully before assembly. Fits for 42-90in plasma and LCD TV. Weight capacity 150lbs(68kg).
-
Page 2: Safety Warning
CAUTION : SAFETY WARNING: Never let children climb on product or play with product. Do not sit or stand on product. Do not fasten a TV that is heavier than the recommended load rating to the mount. Using suitable concrete block/wall or wood stud wall. Improper installation may cause property damage and/or personal injury, so the installation must be done by two qualified contractors. - Page 3 Wall mounting and TV bracket assembly hardware: M8x60mm Lag bolt Anchor Allen key 4pcs 4pcs TV mounting hardware: a--M4x12 screw c--M8x25 screw d--M4x30 screw e--M6x35 screw f--M8x45 screw b--M6x12 screw 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs g--M6x17mm spacer h--M8x22mm spacer...
- Page 4 Step 2 ： Install wall plate (A) on the wall. For concrete wall: Remove the plaster board on the surface of the concrete wall. Hold the wall plate (A) against the concrete wall at the desired position. Next, using a pencil, mark 4 hole locations. Drill holes according to pencil marks using a 3/8" size drill bit to a depth of 2.5".
- Page 5 For wood studs: Using the stud finder, locate your two wood studs. Hold the wall plate (A) against the wall at the desired position. Next, using a pencil, mark 4 hole locations. Pre-drill the 4 marked holes using a 7/32" drill bit to a depth of 2.5". Attach the wall plate (A) to the wall with lag bolts .
- Page 6 Step 3: Hang the pre-assembled TV unit onto the wall plate (A). Pull down straps to lock the brackets in place. (Figure 4) CAUTION: This step must require 2 or more people to complete installation. Figure 4 Step 4: Tighten or loosen these 2 screws on the top of bracket (B) and (C) to level your TV by using the allen key .
- Page 7 Step 5: Adjustment distance from wall and rotation angle from side to side. (Figure 6) 180mm 15° 15° Simulated 42" Flat screen TV with 400mm VESA 60mm Figure 6 Step 6: Tilting angle adjustment (+2°/-15°) ： Loosen handles by maximum 1/2 turns, adjust TV to your desired position, then tighten the handles.
- Page 8 Product dimensions : 826mm 762mm 60mm 180mm MAX:600mm MIN:100mm +2° MAX:400mm MIN:100mm 398mm 299mm 331mm 393mm 359mm -15° 15° 15° Simulated 42" Flat screen TV with 400mm VESA CAUTION : PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV BRACKETS TO THE BACK PANEL OF TV IN STEP 1.