Midea MDF24P2B Series User Manual page 14

Extended dry
When the Extended dry option is selected, the heater and fan operation
will be extended to further improve drying performance. The final rinse
will be elevated to 156.2°F (69°C) and extend the dry by 66 minutes.
e
INDICATOR LIGHTS
Sanitized
The Sanitized indicator light illuminates when the cycle using the
Sanitize option is finished.
The light turns off
any button is pressed.
Clean
Turns on after a cycle is finished. Turns off when the door is opened and
then closed or any button is pressed.
f START
Start - Close the door and press Start.
PAUSE - If you need to pause or cancel a dishwasher cycle in process:
IMPORTANT: Open the door slightly, and then wait for the spray arms
and wash action to stop before opening the door completely. Doing this
will help keep you from being splashed with hot water.
1.
Open the door slightly and wait a few seconds until the wash
action stops.
2.
Open the door to add or remove items.
3.
Close the door and then Press START to resume the wash cycle.
CANCEL -
and hold Start for 3 seconds.
G
SCREEN
Rinse Aid
The Rinse Aid indicator light illuminates when the rinse aid level is low.
Rinse Aid should be added to the Rinse Aid dispenser.
Control Lock
The Control Lock indicator icon illuminates to indicate the Control Panel
is locked. Press and hold DELICATE and QUICK at the same time for 3
seconds to unlock the control panel.
14
turns off when the door is opened and then closed or
To cancel a cycle when the dishwasher is running, press
The cycle will begin.