Preamplifier Section; Fm Tuner Section; Am Tuner Section - Rotel RTC-950AX Owner's Manual

SPECIFICATIONS RTC-950AX
PREAMPLIFIER SECTION
Total Harmonic Distortion....No more than 0.004%
(20 to 20,000Hz from CD/AUX) (Rated output)
Intermodulation Distortion.No more than 0.004%
(60 Hz: 7 kHz = 4:1) (Rated output)
Output Sensitivity/ Impedance.1.0 V/100 ohms
Input Sensitivity / Impedance:
PHONO.2.5 mV/ 47 kohms
CD, AUX, TAPE 1,2.150 mV/ 20 kohms
Overload Level (THD 0.5 %, 1 kHz):
PHONO.180 mV
CD, AUX, TAPE 1,2.5 V
Frequency Respons:
PHONO.20 to 20,000 Hz, +/- 0.2 dB
(RIAA STD)
CD. AUX, TAPE 1,2.4 to 100,000 Hz, + 0 dB,-3.0 dB
Tone Control:
BASS.+/- 6.0 dB (100 Hz)
TREBLE.+/- 6.0 dB (10 kHz)
Signal-to-Noise Ratio (IHF, A netwrok):
PHONO.80 dB
CD, AUX, TAPE 1,2.100dB
Dimensions (overall).440 (W) x 92 (H) x 340 (D) mm
17-3/8" x 3-5/8" X 13-3/8"
Weight (net).5.5 kg/12.10 lbs.
• Specifications and design subject to possible modifica¬
tion without notice.
FM TUNER SECTION
Udsble Sensitivity.10.8 dBf/ 0.95 uV (75 ohms)
50 dB Quieting Sensitivity:
Mono.14.8 dBf/1.5 uV (75 ohms)
Stereo.37.2 dBf/ 20 uV (75 ohms)
Signal-to-Noise Ration (at 65 dBf):
Mono.80 dB
Stereo.75 dB
Harmonic Distortion (at 65 dBf):
1 kHz.0.07 % (mono), 0.25
%
(stereo)
Frequency Response.30 to 15,000 Hz, +/- 1.0 dB
Capture Ratio.1.0 dB
Alternate Channel Selectivity:
(+/-400 kHz).70 dB
Spurious Response Ratio... 100 dB
Image Response Ratio.70 dB
IF Response Ratio.85 dB
AM Suppression Ratio.58 dB
Stereo Separation:
100 Hz/1 kHz/10 kHz.42 dB/ 48 dB/ 35 dB
Subcarrier Product Ratio...60 dB
Antenna Input.75 ohms unbalanced
AM TUNER SECTION
Sensistivity.
Selectivity.
Signal-to-Noise Ratio-
Image Response Ratio
IF Response Ratio.
Antenna.
MISCELLANEOUS
Power Requitement.120 V/ 60 Hz, 220 V/ 50 Hz,
240 V/ 50 Hz (depending on
destinations)
Power Consumption.20 watts
MW LW
.350 uV/ m 750 uV/ m
.30 dB 30 dB
.55 dB 55 dB
.40 dB 40 dB
.40 dB 40 dB
Loop Antenna