Table of Contents
Advertisement
Opening and closing
76
Have the vehicle and SmartKey checked at a
#
qualified specialist workshop.
There is interference from a powerful radio signal
source
Possible causes if the function of KEYLESS-GO is
impaired:
High voltage power lines
R
Mobile phones
R
Electronic devices (notebooks, tablets)
R
Shielding due to metal objects or induction
R
loops for electrical gate systems or automatic
barriers
Make sure that there is sufficient distance
#
between the SmartKey and the potential
source of interference.
Activating/deactivating the automatic locking fea-
ture
The vehicle is locked automatically when the vehi-
cle is switched on and the wheels are turning
faster than walking pace.
To activate: press and hold button
#
approximately five seconds until an acoustic
signal sounds.
To deactivate: press and hold button
#
approximately five seconds until an acoustic
signal sounds.
The red indicator lamp on button
2
once the vehicle is locked.
In the following situations, there is a danger of
being locked out when the function is activated:
while the vehicle is being tow-started or
R
pushed
if the vehicle is being tested on a roller dyna-
R
mometer
Locking/unlocking the vehicle with the mechani-
cal key
Locking/unlocking the driver's door with the
mechanical key
%
If you wish to lock the vehicle entirely using
the mechanical key, first press the button for
locking from the inside while the driver's door
2
for
is open. Then proceed to lock the driver's
door using the mechanical key.
%
If you unlock and open the driver's door with
1
for
the mechanical key, this triggers the burglar
alarm system.
lights up
Advertisement
Table of Contents
