Table of Contents
Advertisement
178 Driving and parking
Press catch
7
to the left and fold open
#
socket cover 5.
%
The CCS charging cable connector requires
connections
6
and 8. Therefore, it is nec-
essary to open both parts of socket cover 5.
Insert the CCS charging cable connector into
#
the vehicle socket to the stop.
Make sure that the charging cable is not taut
when inserted.
4
The # indicator lamp
and status dis-
play
3
flash orange and, as soon as the high-
voltage battery is charged, green.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion refers either to the predicted charge level at
the set departure time or the time at which the
high-voltage battery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the direct current charging process (mode
4)
Requirements
The vehicle is unlocked or the vehicle is locked
R
and the distance between the key and the
vehicle is no greater than 3 ft (1 m).
Press charging interruption button 3.
#
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked.
Advertisement
Table of Contents
