Yamaha Portatone EZ-250i Owner's Manual page 62

Accessory CD-ROM Installation Guide
Installation for Windows 98/Me/2000/XP
Start the computer.
For Windows 2000/XP execute the following steps after the
computer is started.
In Windows 2000, use the "Administrator" account to log in,
then select [My Computer] → [Control Panel] → [System]
→ [Hardware] → [Driver Signing] → [File Signature Verifi-
cation]. Check the radio button next to "Ignore — Install all
files, regardless of file signature," then click "OK."
In Windows XP, select [Start] → [Control Panel]. (If the con-
trol panel appears as shown below, click "Switch to Classic
View" at the upper left of the window to display all Control
Panel icons.) Next, go to [System] → [Hardware] → [Driver
Signing] → [File Signature Verification] and check the radio
button next to "Ignore — Install software, not want to check
(I)," then click "OK." Click "OK" to close System Proper-
ties, then close the Control Panel by clicking the close box
([x]) at the top right of the display.
Insert the included CD-ROM in the CD-ROM drive and click
the "Cancel" dialog on the display.
Check that the instrument is turned off, then connect the USB
terminal of the computer to the USB terminal of the instru-
ment with a standard USB cable. Turn on the instrument, and
the message "Add New Hardware Wizard" (Windows 98/Me/
2000) or "Found New Hardware Wizard" (Windows XP)
automatically appears.
• On some computers, it make take about ten seconds or so for this
display to appear after the instrument is turned on.
In Windows Me, check the radio button next to "Automatic
search for a better driver (Recommended)" of the Add New
Hardware Wizard, then click [Next]. The system searches for
the proper driver and installation starts automatically. Unless
you are manually installing a driver, skip directly to step
below. If a proper driver is not found, select "Specify the
location of the driver (Advanced)" and specify the
"USBdrv_" folder on the CD-ROM
In Windows XP, check the radio button next to "Install the soft-
ware automatically (Recommended)" of the Found New Hard-
ware Wizard, then click [Next]. The system searches for the
proper driver and installation starts automatically. Unless you are
manually installing a driver, skip directly to step
62
EZ-250i Owner's Manual
Click [Next].
From the window that appears, you can select the method of
searching for the driver.
Check the radio button next to "Search for a suitable driver for
your device. (Recommended)," then click [Next].
From this window, you can specify the location of the driver.
In Windows 98, check the "Specify a location" box, click
"Browse..", then specify the "USBdrv_" directory of the CD-
ROM drive (such as D:\USBdrv_\) and continue the installation.
In Windows 2000, check "CD-ROM drive" and make sure all
other items are unchecked.
Click [Next]. The system searches for the driver in the CD-
ROM and prepares to install.
• In some cases, the system may ask you to insert a Windows CD-ROM
while it checks for the driver. If this happens, specify the "USBdrv_"
directory of the CD-ROM drive (for example, D:\USBdrv_\) in Windows
98, or the "USBdrv2k_" directory (for example, D:\USBdrv2k_\) in Win-
dows 2000, and continue the installation.
After confirming that "YAMAHA USB MIDI Driver" is shown
in the driver search window, click [Next]. Installation starts.
• The exact pathname or location of the driver may differ depend-
ing on the particular instrument and other variables.
When the installation is complete and a message appears to
indicate completion, click [Finish].
• On some computers, it make take about ten seconds or so for this
message to appear after installation is complete.
In Windows 2000/XP, the computer is restarted.
The driver has been properly installed.
G Installing KEYBOARDMANIA or Song Filer
Insert the CD-ROM to your computer.
Click the "install" dialog of KEYBOARDMANIA or Song Filer.
For instructions and operation details of KEYBOARDMANIA,
refer to the PDF manuals in the "manual" folder in the CD-ROM.
To view the documentation, you'll need to:
Click [Cancel] to exit from the Install display.
Double-click [My Computer], then RIGHT-click on [CD-ROM].
Select [OPEN], then double-click [KMYE] and double-click [manual].
For instruction and operation detail of Song Filer, refer to the
online help and PDF manual.
* For the latest version of Song Filer, go to the following website.
http://www.yamahapkclub.com./english/download/
songfiler/songfiler.htm
When using KEYBOARDMANIA, set the MIDI port to
USB according to the instructions in the manual (see the file
KM_manual.pdf, pages 7 and 8) contained in the CD-ROM.
When using Song Filer, follow the steps below to set the MIDI port to USB.
Connect the instrument to your computer with a USB cable.
First, turn on your computer, then the instrument, and
finally, start Song Filer.
Open the "MIDI Port Setting" from the Song Filer menu
below.
bar, and select "USB."