Function; Using The Function Parameters - Yamaha Portatone EZ-250i Owner's Manual

Function

The EZ-250i has a variety of settings in the Function parameters.
These give you detailed control over many of the EZ-250i's features.

Using the Function parameters

1
Select a Function name.
Press the [FUNCTION] button, repeatedly if necessary, until appropriate
Function name is appear in the display.
2
Input the appropriate value or use the [+]/[–] buttons to set
the selected Function.
G Function parameters
CATEGORY SELECT
Overall Transpose
Tuning
Split Point
Touch Sensitivity
Sustain On/Off
66
EZ-250i Owner's Manual
00
02
Display Range/ Description
Settings
-12–12 This determines the transposition of the entire EZ-250i sound.
-100–100 This determines the pitch of the entire EZ-250i sound .
000–127 This determines the highest key for the Split voice and sets the Split "point"
— in other words, the key that separates the Split (lower) and Main (upper)
voices. (The Split voice sounds up to and including the Split Point key.) The
default Split Point is 054 (F#2). The Split Point setting and Accompaniment
Split Point setting are automatically set to the same value.
1–3 A setting of "1" results in limited touch response; this setting produces a rel-
atively narrow dynamic range, no matter how lightly or strongly you play
the keys. "2" lets you play over a normal dynamic range (soft to loud), while
"3" is designed for playing very soft passages, giving you slightly more de-
tailed control in the soft volume range. When Touch is turned off (page 27),
a constant velocity value of 80 is produced (total velocity range = 0–127).
On/Off This determines the Sustain on or off.
Press the [+]/[-] buttons to set Sustain to on or off.
• To save the Function parameters
and the Touch on/off status to
internal memory (flash memory),
press and hold the [FUNCTION]
button. (See page 68.)
• To input a negative value, simul-
taneously hold the [–] button and
enter the number.
*
*
*
*
*