Acer XL2330W User Manual page 5

Portrait projection
Do not use the projector with it leaning to the left and right. This may result in a malfunction, however, portrait
installation is possible.
otee:
‡
Please do not install the projector in a vertical orientation on the top of the floor or table on its own.
The intake vent may be obstructed, resulting in the projector getting warm and the possibility of fire
and malfunction occurring.
‡ When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake
and exhaust vents.
Caution for Listening
To protect your hearing, follow these instructions.
y Increase the volume gradually until you can hear clearly and comfortably.
y Do not increase the volume level after your ears have adjusted.
y Do not listen to music at high volumes for extended periods.
y Do not increase the volume to block out noisy surroundings.
y Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and
ensure utmost protection of the global environment, please recycle. For more information on
the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit
acer-group.com/public/Sustainability/sustainability01.htm
Do not stare into the beam
IEC 60825-1:2014, EN 60825 1 2014 A11 2021, EN 50689:2021 CLASS 1 CONSUMER
LASER PRODUCT RISK GROUP 2, Complies with 21 CFR 1040.10 and 1040.11 except for
conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed.1.0. For more information
see Laser Notice No. 57, dated May 8, 2019.
IEC 60825-1:2014
IEC 60825-1:2014 1
Laser otice
IEC 60825-1:2014: CLASS 1 LASER PRODUCT - RISK GROUP 2.
The product's intended use as a consumer laser product and compliant with EN 50689:2021.
CLASS 1 CONSUMER LASER PRODUCT
EN 50689:2021
- : + :
1 RG2
RG2
http://www.
5
English