Operating Instructions; Care And Maintenance; Troubleshooting - Utilitech SFD3-450BI Manual

OPERATING INSTRUCTIONS

1. ADJUSTING AIR SPEED
Adjust the desired speed by rotating the switch knob
0 Stop 1 Low
2. ADJUSTING INTERNAL ORBITAL OSCILLATION FEATURE
The internal orbital oscillation feature can be turned on by rotating
the switch knob to the side sticked "Orbital Oscillation". To disengage
the oscillation feature, turn the switch knob to the side sticked
"Orbital Oscillation Off".

CARE AND MAINTENANCE

Unplug the appliance before cleaning. Don't use any water for cleaning metal surfaces. In order to
remove the dust from the protective screen, use a vacuum cleaner or remove the front protective
screen by removing the securing screw on the edge of the screen with a screwdriver. After cleaning,
remount the safety screen. After doing this, fasten the securing screw on the edge of the protective
screen.

TROUBLESHOOTING

PROBLE
The fan fails to
operate.
Orbital oscillation
feature not
working.
2 Medium 3 High
1. Fan may not be plugged in.
2. There may some be obstructions
in the fan.
3. Orbital oscillating feature is not
turned on.
1. Make sure the fan is plugged in
and electrical outlet is working
properly.
2. Check for any obstruction. If you find
an obstruction, turn the fan to "0".
Unplug the fan and carefully remove
the obstruction. Plug the fan in and
turn it on again, referring to the
OPERATING INSTRUCTIONS.
3. Make sure that orbital oscillation
switch is turned on.
6