Advertisement
This
remote control can be used to operate the receiver you purchased
• For an explanation on how to set up your remote control and pre-
and-some other Panasonic and Technics compact cassette decks, CD
cautions, see page 5.
:
changers (and CD players), TVs, VCRs and laser disc players, provided
• For details on operating other equipment,
see the instruction man-
they are equipped with the remote control sensor,
ual provided with the specific unit.
To operate
the receiver
Facing toward the receiver
@
66 6
CHSELECt
- c. _+
0000
Basic operations
To turn the power
ON/OFF
To select an input
source
To mute the sound
level
To adjust the volume
level
TUNER
POWER Once the power has been set to ON, it can be turned
O
=_ O
ON and OFF simply by pressing POWER.
W/DVO
VCR
OO
T_
TUNER
_
W_I fll TIll
ooo
• PHONO can not be sdl_ffedwithrthis remote con-
trol.
• Selecting TAPE MONITOR turns ON the tape
monitor function. Pressing it again or another input
select button turns the function OFF.
MUTING
O
--
vOLUME
÷
The message"MUTING ON NOW" runsrepeatedly
from rightto leftacrossthe displayas longas the mut-
ing function is on.
Pressoncemoreto returnto the originalvolume.
I_r_FJ
After tuming the power of the TV, VCR or laser disc player ON or OFF,, always press
TUNER before pressing POWER when turning the power of the receiver ON and OFF.
Facing
toward the receiver
To use Dolby Pro Logic
@6 cb
i
c::b
c:bcbc:b6
E6-
61
_CZZ_
To turn on Dolby Pro
Logic and select the
desired mode
To output a test signal
To adjust the output
level of center speaker
and/or surround speak-
ers
To turr_ Dolby Pro
Logic OFF and ON
0[_
LOG_
0
Changes as follows each time the button is pressed.
SURROUND
,_. 3 STEREO
When the SURROUND or 3 STEREO mode is ON
TEST
0
Press once more to stop the test signal.
When the SURROUND
or 3 STEREO mode is ON
(_Selects
channel between center (C) and
surround (S).
(_)Adjusts output level
CH_ELECT
0
!,
--CHLEVEL+
O0
When the SURROUND
mode is ON and the center mode is on PHAN-
TOM, you cannot select the center channel. When the 3 STEREO mode is
ON, you cannot select the surround channel.
OFF/ON
O
ii
Advertisement
