Advertisement
O0
0
TUNER
I
Se
band
TUNER
%
/1",.
(approx. 10 seconds)
[]
You can use the tuning buttons to tune-in radio stations.
B
Press TUNER.
[]
Press BAND to select "FM" or "AM".
I_
Press TUNING (V) or (A) to tune to the
desired frequency.
Tuning intervals
FM: 0.2 MHz
AM: 10 kH:-.. °.........
"QUARTZ LOCK" lights up when tuned.
"STEREO"
lights up when an FM stereo
broadcast
is
received.
To make an automatic search for broadcast stations
If TUNING (V) or (A) is held down for an instant until the fre-
quency begins to scroll, the broadcast stations can be tuned
in automatically when a broadcast station is found.
Tuning may stop automatically if any jamming is encountered.
.,o.,.,
,.,.....,
.....,.......,....,....
,....,....°..H
,..°.......--.....
,,..°-*H
If noise is excessive in the FM stereo mode
Press FM AUTO/MONO.
(The "STEREO" indicator will go out, and the "MONO" indicator will
light up.)
The broadcast will be monaural, but noise will be reduced.
If the button is pressed
once more, the stereo mode will be
resumed.
(Only available from the remote control.)
[]
Specify the frequency using the numeric buttonson the remote
controltransmitter to directlytune tothe desiredstation.
First select between FM and AM with the BAND button on the
receiver.
H
Press TUNER.
This will set the remote control to operate the tuner.
I_
Press DIRECT TUNING/DISC
ENTER.
!
Press the appropriate numeric buttons to
enter the frequency, while cursor display is
flashing.
Tuning intervals,
FM: 0.1 MHz
/_M: 10 kHz
If the desired FM frequency is 107.9 MHz,
r
p__s
,.-
m-, @---I_-, []
If the frequency
has been input correctly,
the displayed
frequency will blink once.
1. If no button is pressed while the cursor display is flashing,
the display will return to .th9 frequency which is currently
being received. To re-specify the frequency, repeat tile- -
p_rocedurefrom step 2.
2. If the frequency
has not been input correctly, "ERROR"
indication will be displayed.
In this case, re-enter the
frequency.
t
Advertisement
