Thanks for choosing Universal Equipment/Electronic Device Rack Stand
•
Open the box you will find below parts, A,B,C,D
•
Install 4 casters on the B, two with brakes should be in front
•
Connect two B with E with the equipped bolts
•
Insert D into the top of two B and fix with two equipped plastic knobs
•
Mount two C on D with equipped bolts and screw
•
Tighten all the bolts, knobs then you can use this rack
•
Then you can mount your 19" equipment on the rack and put your other equipment on the top brackets
C, such as the mixer, keyboard, control workstation
2