Supra Vision Control Owner's Manual page 35

Setting the Wake Amplitude
Use this setting to define the amplitude of your wake (0 is mellow and 100 is
aggressive). The Wake Amp* bar will fill or empty to the target Wake Amp
setting, indicating your total fill level for all ballast.
The Persons/Gear on the right is used to reference the current calculated
weight of your boat (including passengers, gear and ballast). Weight plays a
big part in driving the size of your wake. Adjust the Wake Amp number in
relation to the Persons/Gear number to determine your current/actual Wake
Number position (i.e., what could be possible if gear and passenger weight was
adjusted).
*
Amplitude Display: U.S. Patent No. 9,950,771; 10,577,054.
Swell™ Surf and Plates
Swell™ Surf will only engage when:
•
Cruise is on
•
Current speed is between 7 mph and 14.5 mph, and
•
Set speed is less than 14.5 mph.
Touch a directional Surf icon to select surfing either on the Left or Right.
2023-11-30
See www.skierschoice.com/patents-trademarks/
35
for virtual patent marking.
2301122