Supra Vision Control Owner's Manual page 33

Ballast and Pitch & Roll Set Points
Touch the Advanced button and the following image will appear:
Save the new ballast settings by touching
touching .
2023-11-30
Note: The engine must be running to fill the ballast.
When AutoWake is off adjust the Ballast settings by the up
and down arrows.
Touch
Touch
engine is not running, the manual override will be enabled
and the following screen will appear while the ballasts are
draining.
Turn off the draining of the ballast by touching
While the ballast is filling or draining, arrows will
appear on screen to depict the direction and where to
shift the existing weight to compensate for the lost
to fill all three ballasts at one time.
to drain all three ballasts at one time. If the
ballast weight.
or discard the changes by
33
.
2301122