Advertisement
Available languages
Available languages
Location and Function of Parts
9 DIGITAL IN (digital video signal input)
connector (BNC type)
Used for input of an HD serial digital video signal.
0 DIGITAL OUT 1, 2, 3, and 4 (digital video
signal output) connectors (BNC type)
Used to output the signal input from the DIGITAL IN
connector, converted to a 525 component serial digital
video format. The output signal format can be set
using switch S12 on the component side of the HKPF-
525 to one of the following three:
525 4:2:2 Y/B–Y/R–Y component serial digital video
525 4:4:4 Y/B–Y/R–Y component serial digital video
525 4:4:4 GBR component serial digital video.
!¡ REMOTE IN (remote signal input) connector
(D-sub 9-pin)
Used to connect an HKDV-503 HD Digital Video
Controller. When the REMOTE/LOCAL switch is set
to REMOTE, the HKPF-525 will be controlled by the
HKDV-503.
4(E)
Advertisement
