Safety Instructions; Instructions; Warning; General - Lapierre LB User Manual

SECTION 2 SAFETY INSTRUCTIONS
2.1

INSTRUCTIONS

• It is important to read, understand and follow the instructions and warnings contained in this user manual.
• This manual must be stored in a known place and accessible at all times by staff.
• All product operators must be familiar with the contents of this manual.

2.2 WARNING

General

• Usage:
- interior only,
- at temperatures ranging from 5 to 40 °C (41 to 104 °F).
• Avoid temporarily moving the In-Line Brix Meter so that it is subjected to sudden and severe temperature
variations.
• Avoid installing the meter:
- in direct sunlight,
- near a major heat source,
- in a place where it is subject to sudden and severe temperature variations,
- where it is subject to strong vibrations,
- in a damp place.

Electricity

• Never plug in or unplug the In-Line Brix Meter when your hands are wet.
• Never connect the electrical cords to overloaded electrical circuits.
• Never use extension cords that are longer than necessary or of low gauge.
• Make sure that the electrical cords are in good working order, that they are not pinched or stripped, and that
they are not altered in any way that could affect their safe use.
• Never touch a stripped wire or a wire that has been pulled out of its electrical outlet when it is live. Turn the
meter off and repair it before turning it back on and using it.
• Always unplug the power cord from the equipment when it is not going to be used for a long period of time.

Liquids

• Never expose the In-Line Brix Meter to rain or excessive condensation.
• Never bring liquids into contact with the meter's electronic components.

Other

• Never place heavy objects on the In-Line Brix Meter, as their weight could damage it.
Lapierre Equipment | 0-45 DEGREE IN-LINE BRIX METER | USER MANUAL | Version 01 - February 2024
5