In-Line Brix Meter Initialization: Sequence Of Displays; Illustration 3 | Screen No. 1: Les Équipements Lapierre (Lapierre Equipment); Illustration 4 | Screen No. 2: Software Version; Illustration 5 | Screen No. 3: Temperature Measurement Unit - Lapierre LB User Manual

SECTION 3 Start-up and operating procedures (continued)

3.2 IN-LINE BRIX METER INITIALIZATION: SEQUENCE OF DISPLAYS

Here is the sequence of displays, in order, when the In-Line Brix Meter is initialized.
1. "Les Équipements Lapierre".
Illustration 3 | Screen No. 1: Les Équipements Lapierre (Lapierre Equipment)
2. The software version, "Version 3.01" in our example.

Illustration 4 | Screen No. 2: Software version

3. The unit of measurement for the selected temperature, i.e. degrees Celsius "°C" in our example.

Illustration 5 | Screen No. 3: Temperature measurement unit

4. End of In-Line Brix Meter initialization.

Illustration 6 | Screen No. 4: Last display of the In-Line Brix Meter initialization sequence

Following the sequence of 4 successive initialization screens, the In-Line Brix Meter starts reading the Brix degree
and concentrate temperature at the concentrator outlet. It then displays the following reading screen (fictitious
data).

Illustration 7 | Current reading of Brix degree and concentrate temperature

Lapierre Equipment |
0-45 DEGREE IN-LINE BRIX METER
| USER MANUAL | Version 01 - February 2024
8