Download
Share
Print this page
VEVOR 18702 User Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Grinder
  5. 18702
  6. User manual
VEVOR 18702 User Manual

VEVOR 18702 User Manual

Cordless angle grinder tool
Hide thumbs

Advertisement

Quick Links

Download this manual
Support and E-Warranty Certificate https://www.vevor.com/support
CORDLESS ANGLE GRINDER TOOL
USR MANUAL
MODEL:18702
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 18702 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for VEVOR 18702

Summary of Contents for VEVOR 18702

  • Page 1 Support and E-Warranty Certificate https://www.vevor.com/support CORDLESS ANGLE GRINDER TOOL USR MANUAL MODEL:18702 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
  • Page 3 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 4 - 2 -...

  • Page 5: Safety Precautions

    SAFETY PRECAUTIONS General Power Tool Safety Warnings WARNING Read all safety warnings and all in-structions. Failure to follow thewarnings and instructions may result in electric shock, fireand/or serious injury. Save all warnings and instructions forfuture reference. The term"power tool"in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-less)power tool.
  • Page 6 unplugging the power tool, Keep cordaway from heat, oil, sharp edges or moving parts.Damaged orentangled cords increase the risk of electric shock. When operating a power tool outdoors, use an exten-sion cord  suitable for outdoor use. Use of a cord suit-able for outdoor use reduces the risk of electric shock..
  • Page 7 collection facilities, ensure these are connected and properly used. Use of dust collection can re- duce dust-related hazards. Power tool use and care Do not force the power tool. Use the correct power tool for your  application. The correct power tool will do the job better and safer at the rate for which it was designed.
  • Page 8 Recharge only with the charger specified by the manufacturer. A  charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. ...
  • Page 9 operation. The rated speed of the accessory must be at least equal to the  maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart. The outside diameter and the thickness of your accessory must ...
  • Page 10 cause injury beyond immediate area of operation. Hold the power tool by insulated gripping surfaces only,when  performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a"live"wire may make exposed metal parts of the power tool"live"and could give the operator an electric shock.
  • Page 11 as given below.  Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces.Always use auxiliary handle,if provided,for maximum control over kickback or torque reaction during start-up. The operator can control torque reac-tions or kickback forces, if proper precautions are taken.
  • Page 12 protect operator from broken wheel fragments,accidental contact with wheel and sparks that could ignite clothing.Wheels must be used only for recommended applications.For example:do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peri-pheral grinding, side forces applied to these wheels may cause them to shatter.
  • Page 13 Support panels or any oversized workpiece to minimize the risk  of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
  • Page 14 with electric cables can cause fire and electricshock.Damaging gas lines can lead to ex-plosion.Breaking water pipes causes property damage. Do not touch grinding and cutting discs until they have cooled  down.The discs can become very hot while working. Release the On/Off switch and set it to the Off position when the ...
  • Page 15 product near your body for extended periods. The Bluetooth® word mark and logos are registered trade-marks owned by Bluetooth SIG,Inc.and any use of such marks by Robert Bosch Power Tools GmbH is under license. Product Description andSpecifications Read all the safety and generalinstructions. Failure to observe the safety and generalin-structions may result in electric shock,fire and/or serious injury.

  • Page 16: Technical Data

    TECHNICAL DATA Angle grinder 8702 Rated voltage No-load speed³ 8200 Max.grinding disc diameter 115mm Grinding spindle threa Kickback stop  Restart protection  Run-out brake  Speed preselection Weight according to EPTA-Procedure 01:2014 - with low-vibration auxiliary handle 2.5-3.5 - with standard auxiliary handle 2.3-3.3 Recommended ambient temperature during charging 0...+35...

  • Page 17: Charging The Battery

    be signi-ficantlyweaker inside closed rooms and through metallic barriers(e.g.walls,shelving units,cases,etc.). CHARGING THE BATTERY Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool. Note: The battery is supplied partially charged. To ensure fullbattery capacity, fully charge the battery in the charger before using your power tool for the first time.
  • Page 18 of the battery. Forsafety reasons, it is only possible to check the state of charge when the power toolis not in operation. Press the button for the battery charge indicator ornoto show the state of charge. This is also possible when the bat- tery is removed. If no LED lights up after pressing the button for the battery charge indicator, then the battery is defective and must be replaced.
  • Page 19 Protective guard for grinding Place the protective guard(10)onto the holder on the power tool until the coding cams of the protective guard are aligned with the holder.When doing so,press and hold the unlocking lever(1).Press the protective guard(10)onto the spindle collar until the shoulder of the pro-tective guard is sitting on the flange of the power tool and rotate the protective guard untilit audibly clicks into place.
  • Page 20 bonded abrasives. Provide sufficient dust extraction when cutting stone.  The protective guard for cutting(15) is fitted in the same way as the protective guard for grinding(10). Side handle Do not operate your power tool without the side handle (9). ...
  • Page 21 Clean the grinding spindle(18)andallthe parts to be fitted.Lock the grinding spindle with the spindle lock button(3)before clampingand releasing the abrasive tools. Do not press the spindle lock button while the grind·ing spindle  is moving.The power tool may become dam-aged if you do this. Grinding/Cutting Disc Pay attention to the dimensions of the grinding tools.The mounting hole diameter must fit the mounting flange without play.Do not use reducers or...
  • Page 22 Screw on the round nut(22)and tighten with a two-pin spanner. Cup brush/disc brush Always fit the hand guard(19)when working with the cup brush or  disc brush. See the graphics page for fittinginstructions. The cup brush/disc brush must be screwed onto the grinding spindle until it rests firmly against the grindingspindle flange at the end of thegrinding spindle thread.Tighten the cup brush/disc brush with an open-ended spanner.
  • Page 23 willensure that the workpiece does not become too hot or discolourand that grooves are not formed. Flap disc The flap disc(accessory)enables you to machine curved surfaces and profiles. Flap discs have a considerably longer service life,lower noise levels and lower sanding temperatures than conven-tional grinding discs. Cutting metal Always use the protective guard for cutting(15)when cutting bonded ...
  • Page 24 diamond cut-ting disc. If this happens,stop cutting and allow the diamond cuting discto cool down by running the powertool fora short time at maximum speed with no load. Working noticeably slower and with circular sparkingindicate that the diamond cutting disc that has become dull.You can resharpen the disc by briefly cutting into abrasive mater-ial(e.g.lime-sand brick).
  • Page 25 Store and handle the accessories carefully. Transport The contained lithium-ion batteries are subject to the Dan-gerous Goods Legislation requirements.The batteries are suitable for road-transport by the user without further re-strictions. When shipping by third parties(e.g.;by airtransport orfor-warding agency), special requirements on packaging and la-belling must be observed.For preparation of the item being shipped,consulting an expert for hazardous material is re-quired.
  • Page 26 Importer: WAITCHX Address: 250 bis boulevard Saint-Germain 75007 Paris Importer: FREE MOOD LTD Address: 2 Holywell Lane, London, England, EC2A 3ET Manufacturer: CHUANGWEI ELECTRIC TOOLS MANUFACTURE CO.,LTD Address： No. Lieqiao Area Yongkang Zhejiang China Made In China EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH EUREP GmbH...
  • Page 28 Support and E-Warranty Certificate https://www.vevor.com/support...