Table of Contents
Advertisement
Quick Links
Technical Support and E-Warranty Certificate www.vevor.com/support
GRINDER
USER MANUAL
MODEL: SX-2A SX-4A SX-6B SX-8B SX-10B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Related Manuals for VEVOR SX-2A
Summary of Contents for VEVOR SX-2A
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support GRINDER USER MANUAL MODEL: SX-2A SX-4A SX-6B SX-8B SX-10B We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 2 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
- Page 3 Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list and hardware contents. Do not attempt to assemble the unit if any parts are missing or damaged. Contact customer service for replacement parts. Warnings When using electrical appliances, basic safety precautions should always be followed including the following:...
- Page 4 change or alter the plug in any way. NEVER break off a grounding prong from a 3--‐conductor plug. Doing so will invalidate the warranty and may cause electric shock. 11.Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near the edge of the worktop, where it can be easily pushed off or fall. 12.The Gear Housing and the Motor Cover may become HOT during operation. This is nor mal. DO NOT TOUCH these parts while operating. 13.To reduce the risk of unintentional starting, check that the control is OFF before pluggin g the cord into wall outlet. To disconnect, turn the controller to OFF, then remove plug from wall outlet. 14.DO NOT operate your grinder under a wall cabinet. Always unplug the unit from the elec trical outlet when storing it. Not doing so could create a risk of fire, especially if the appliance touches the walls of th e garage or the door touches the unit as it closes. ...
-
Page 5: Technical Parameter
The sparks and the brush frictional odor will disappear after you use the machine some times later. You can Grind some rice or tea leaves first for several times to eliminate the odor. TECHNICAL PARAMETER MODEL Capacity RATINGS Continuous working time 110V/60Hz SX-2A 100g 450W 230V/50Hz 110V/60Hz SX-4A 200g 900W 230V/50Hz... -
Page 6: Product Structure
PRODUCT STRUCTURE - 5 -... - Page 7 OPERATING INSTRUCTION 1. Operations Guide: 1)Open the upper cover and put the dried material inside; 2)Close the upper cover tightly; (Please make sure the lid is rotated to the end and locked tightly on the top.) 3)Plug in and turn on the timer switch, then turn on the switch for grinding(Rolling sound will be heard );...
- Page 8 * What to do if the grinder suddenly stops working? If the grinder stopped working, the reason may be that the blades bottom is stuck or the overload protector function works because of overload and the carbon brush is worn. It's easy to solve this problem.
- Page 9 damage to the motor. 3) Put too much materials into the grinding bin one time. The material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank. Because this machine needs a space to complete the cycle of the blades and the material to be grind.
-
Page 10: How To Replace The Blade
HOW TO CLEAN UP THE GRINDING BIN You can clean up the grinding bin of grinder with a brush first,and then clean it with dry cloth. After using blades for a long time ,you can remove them and clean them with water.(The blades of new grinder must be very tight,you need to use for a long time,then blades can be removed.) •... - Page 11 OPERATING PROCEDURES OF REPLACING BLADES - 10 -...
-
Page 12: How To Replace Carbon Brushes
HOW TO REPLACE CARBON BRUSHES • The upright type grinder: • The swing type grinder: - 11 -... -
Page 13: Troubleshooting
TROUBLE SHOOTING Elimination method (*Please cut off Trouble Cause the power when doing following) Please plug in the power cord and check whether the power indicator Poor contact between lights is on. the plug and socket. If the indicator does not light, then the power cord is faulty. -
Page 14: Environmental Protection
Stuck inside of crush cabin by material, or Remove the stuck stuff. foreign subject. Motor run slowly,or not runs, even Insert the plug directly wall socket vibrates,making noise. instead of the terminal block. Then Low power voltage. try another place to see if the machine can be turned on. - Page 15 Importer: WAITCHX Address: 250 bis boulevard Saint-Germain 75007 Paris Importer: FREE MOOD LTD Address: 2 Holywell Lane, London, England, EC2A 3ET EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany Manufacturer: Anhui Xuzhong Intelligent Technology Co., Ltd.
- Page 16 TechnicalSupport and E-Warranty Certificate https://www.vevor.com/support...
Need help?
Do you have a question about the SX-2A and is the answer not in the manual?
Questions and answers