Table of Contents
Advertisement
Final work
Attaching
the lifting column
cover panels
5-5
Fig.1 2
r
Fig.14
l
Tilt the unit in the + 88"- position
Fig.1 3
Fig.1 5
l
Install cover plate N (Fig.9) on the bottom of the table (YjFig.12).
l
Place plastic part 0 (Fig.9) on the IiHing column according
to its shape and
attach with Allen screws (Fig.13).
l
Tilt back the unit in the 0". position and switch off again.
l
Attach cover plate R to the IiHing
column
and
attach
the
top
with
2 screws;
hin-
ge up the flap (UiFig.14).
l
On the opposite lifting column side, attach cover panel P (Fig.9) to cover pa-
nel R and fix with 8 M4 nuts (Fig.14);
let the 2 plastic bolts (riFig.15)
engage in the elongated holes (riFig.14)
of
the screen guide.
Siemens
AG
RLL5310.031.01.01.02
Mcd~cal
Englnecrlrq
Grtrrrp
Rev.
01
Advertisement
Table of Contents
