Advertisement
Quick Links
Westwind™ Single Handle Kitchen Faucet,
Pull Down
Spray, Deckplate Optional, Chrome, 1.8 GPM
Mezcladora Westwind™ para cocina de un solo maneral,
rociador extraíble, con placa protectora opcional, cromo, 1.8 GPM
NSF/ANSI/CAN 61: Q ≤ 1
Exclusively Distributed By:
HD Supply
Atlanta, GA 30339
© 2022
Without Deckplate
Sin Placa De Cubierta
With Deckplate
Con Placa De Cubierta
1
Part #: 211808
USN #: 320467658
Mfg #: 67242W-1001
To Reorder:
1-800-431-3000
hdsupplysolutions.com
Advertisement
Related Manuals for SeasonsComfort Westwind 211808
Summary of Contents for SeasonsComfort Westwind 211808
- Page 1 Part #: 211808 USN #: 320467658 Mfg #: 67242W-1001 Westwind™ Single Handle Kitchen Faucet, Pull Down Spray, Deckplate Optional, Chrome, 1.8 GPM Mezcladora Westwind™ para cocina de un solo maneral, rociador extraíble, con placa protectora opcional, cromo, 1.8 GPM Without Deckplate With Deckplate Sin Placa De Cubierta Con Placa De Cubierta...
-
Page 2: Preparation / Preparación
Preparation / Preparación Before beginning the assembly of this product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Antes de comenzar el ensamblaje del producto, asegúrese de tener todas las piezas. - Page 3 Assembly Instructions / Instrucciones de Ensamblaje Without Deckplate (optional): With Deckplate (optional): Shut off the water supply. Remove the old faucet. Clean the mounting Align the hole in the gasket (D) and deckplate (C) with the mounting surface. Place the faucet (A) through the mounting holes in the sink hole in the sink.
- Page 4 Assembly Instructions / Instrucciones de Ensamblaje Flushing and checking for leaks： Important: After installation is completed, turn on the hot and cold water supplies. Check for leaks. Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction.
- Page 5 Troubleshooting / Solución de Problemas There is no hot or cold water. The water inlet hose was acccidentally Reinstall the water inlet hose. kinked during installation and is limiting the water flow through. La manguera de entrada de agua se torció Vuelve a instalar la manguera de entrada de No hay agua caliente o fría.