Advertisement
Quick Links
Centro Business 3.0 (VDSL)
How to set up
your router
Swisscom (Switzerland) Ltd.
Postfach
3050 Bern
www.swisscom.ch/kmu
0800 800 800
Swisscom (Switzerland) Ltd.
Enterprise Customers
3050 Bern
www.swisscom.ch/enterprise
0800 800 900
The package includes:
Ethernet cable
DSL cabel
Centro Business 3.0
Power adapter
Installation overview
Your internet is now ready.
1
Remove your old Internet /
telephony installations (if any).
Make sure the router
is vertical for optimum
WLAN range!
6
Please refer to the relevant
instructions for setting up other
services and products.
Send your old device back to Swisscom free of charge for
recycling. Reset the router to factory settings beforehand.
2
Connect the DSL cable.
3
Connect the power adapter and
switch on the router.
4
Wait for the
and
LEDs to
light up white permanently.
The router can restart multiple times during the installation.
5
Connect your phones directly to
the router.
IP phone or
Analogue phone
point-of-sale
or fax machine
terminal
Ethernet
Phone
If you have subscribed to fixed network telephony, the
service will be activated within 15 minutes and the
lights up white.
LED
Advertisement
Related Manuals for Swisscom Centro Business 3.0
Summary of Contents for Swisscom Centro Business 3.0
- Page 1 0800 800 900 If you have subscribed to fixed network telephony, the Send your old device back to Swisscom free of charge for service will be activated within 15 minutes and the recycling. Reset the router to factory settings beforehand.
- Page 2 LED flashes white – router launch, configuration or update in progress. Please do not switch off. LED lights up white – router is ready. LED lights up red – there is a fault. For more information, go to: www.swisscom.ch/centrobusiness...
Need help?
Do you have a question about the Centro Business 3.0 and is the answer not in the manual?
Questions and answers
I am unable to find router admin password . Where can I find it ?