Swisscom Centro Business 3.0 How To Set Up

Centro Business 3.0 (XGS-PON)
How to set up
Centro Business 3.0
your router
8
Send your old device back to Swisscom free of charge for
recycling. Reset the router to factory settings beforehand.
7
Swisscom (Switzerland) Ltd.
Postfach
3050 Bern
www.swisscom.ch/kmu
0800 800 800
Swisscom (Switzerland) Ltd.
Enterprise Customers
3050 Bern
www.swisscom.ch/enterprise
0800 800 900
If you have subscribed to fixed network telephony, the service will be activated within 15 minutes and the
1
The package includes:
Ethernet cable
Fibre-optic cable
> Open the Business-Center: https://extranet.swisscom.ch
> EC Dashboard: Choose Agreement
> Choose location
> Centro Business > Pairing > Create Pairing >
> Enter MAC-address >
Power adapter
>
Installation overview
Your internet is now ready.
Please refer to the relevant
instructions for setting up other
services and products.
Connect your phones directly to the router.
IP phone or
point-of-sale terminal
Ethernet
Note for for Enterprise Connect customers only:
6
Analogue phone
or fax machine
Phone
LED lights up white. The router can restart multiple times during the installation.
2
Switch off the current router, but only remove it after
successfully setting up the fibre-optic link.
3
Make sure the router
is vertical for optimum
WLAN range!
Use the included fibre-optic cable.
4
Fibre socket: Usually slot 2, rarely slot 1.
5
Wait for the and LEDs to
light up white permanently.
Remove your old Internet /
telephony installations (if any).
OFF
Connect the Fibre-optic cable to
the router.
Connect the fibre-optic cable to
the fibre-optic socket.
Connect the power adapter and
switch on the router.