Masimo Stork Vitals Quick Start Manual

Quick Start Guide
What's in the box?
Sensor Magnetic
Charge Cable
and Cable Clip
Sensor
Medium Boot
2 X 5W
(Size 4 Strap
Charge Adapters
Pre-Attached)
Small Boot
Size 1 and
(Size 3 Strap
Size 2 Straps
Pre-Attached)
Hub
Hub Power Cable
Not intended for use as a medical device or
to replace a medical device. Do not use it to
diagnose, cure, treat, alleviate, or prevent
any disease or health condition.

Charge the sensor

vitals
Plug the Sensor Magnetic Charge Connect the magnetic end of the cable to the
Cable into the 5W power adapter. sensor. Fully charge the sensor before use.
5W
Peel and stick the cable clip
to secure the sensor charge cable.

Pair the sensor to the app

Download the Stork app and follow instructions.
Add straps to sensor and boot
Size 1 strap
(for newborn foot)
The sensor is fully charged
when the LED turns white.
Remove sizes 1 and 2
from paper sleeve.
SIZE
1
In paper sleeve
SIZE
2
In paper sleeve
SIZE
3
Preattached on small boot
SIZE
4
Preattached on medium boot
The app screens shown in this document might
differ from the actual ones displayed in the app.

Insert Sensor Into Boot

Slide on

Apply Boot to Either Foot

Slide on
Ankle
Longer strap

Check the Strap Length

Sensor Sensor
Shorter strap Shorter strap
Too long
(Velcro not on fabric)
Press down to secure the
sensor. The sensor should
sit flush in the boot.
Insert the sensor at
an angle, toe end first.
Perfect! Too short
© 2023 Masimo. All rights reserved. 304488/11992A-0523