Table of Contents
Advertisement
fees,
nets,
TURNTABLE
FACILITIES
NOTE:
Hlustration shows PL-322Z.
:
PL-202AZ
and PL-222Z
are not equipped
with
dise size :
Switch. PL-222AZ and PL-322AZ are not equipped with dust
cover.
@ EP adaptor
Place over the spindle to play 45 rpm singles.
@ Platter spindie
@ Platter mat
@ Platter
© SPEED switch
Set this switch in accordance with the speed of the record.
33.7
records. 45 : For 45 rpm records
© ARM ELEVATION switch
:
* Use the switch for manual play.
?
* Use the switch to suspend record play temporarily.
* Use the switch when changing the tracks during actual-play.
fUP] :
The tonearm rises (the stylus moves away from the
record).
[DOWN] : The tonearm descends (the stylus is lowered onto
the record}.
@ SIZE switch (PL-322AZ, PL-3222Z)
Set this switch in accordance with the size of the record.
30: For 30 cm records.
17: For 17 cm records.
:
STOP switch (PL-202AZ, PL-2222Z)
Press this switch for stopping play.
'
® PLAY/STOP switch (PL-322AZ, PL-322Z):
Press this switch for stating auto play or for stopping play.
NOTE:
Be sure to press the switch firmly when starting playback: if not
pressed
firmly,
the piatter may
rotate
without
the tonearm
moving.
© Cartridge
@ Tonearm
@ Arm rest
@® Dust cover (PL-222Z, PL-3222)
The tone for the left {L) and right (R) audio channels can be
adjusted separately with this graphic equalizer. The advantage of
the GRAPHIC EQUALIZER over conventional tone controls is that
with the five controls of the GRAPHIC EQUALIZER it is possible
to control five different narrow. With conventional tone controls
a setting for 4 bass or treble boost or cut will also affect the lower
or upper mid frequencies. The frequency bands controlled by the
five slide controls
have
been
chosen
to yield the maximum
possible control action within the audio spectrum.
100 Hz: The 100 Hz control is very useful for enhancing low
bass notes as in organ music.
330 Hz: The 330 Hz contro! will allow you to vary the upper
bass frequencies.
1kHz:
The 1 kHz control is the presence control and can be
used very effectively to emphasize,
or de-emphasize
vocalists.
PRELIMINARY OPERATIONS
3.3 kHz: The 3.3 kHz control will add brilliance and clarity to
brass instruments and violins.
10 kHz: . The 10 kHz control can be used to make up for missing
high frequencies absorbed by the environment and to
add a natural crispness to music.
:
Emphasize
g
frequency
a
range
De-emphasize
e
frequency
100Hz2
330H2
kHz
3.3kHz
10kHz
range
NOTE:
The
GRAPHIC
EQUALIZER
centrais
function.
in. the 'modes
playback and recording.
The GRAPHIC EQUALIZER coritrols da
not function when recording from Deck i to Deck I finciuding
tape copying).
e PERFORM
THE FOLLOWING
PROCEDURES
BEFORE
STARTING
ANY
OF
THE
OPERATIONS.
1
3
1. Press the POWER
switch to ON.
¢ The STANDBY/SLEEP indicator will go out.
2. Select the SPEAKERS switch.
3. Select the FUNCTIGN
switches before operating
any of the equipment.
® To listen to a compact dise : [CD]
® To listen to a record : {PHONO}
® To listen to an FM or AM broadcast : [TUNER]
To listen to a cassette tape : [TAPE]
# To
listen
to equipment
connected
to the
VIDEO/AUX
jacks: [VIDEO/AUX]
When
a FUNCTION
switch
is pressed,
the corresponding
indicator lights.
3
<ARB1179>
Advertisement
Table of Contents
