Table of Contents
Advertisement
CALL TIME DISPLAY
This feature automatically records the elapsed time
per conversation. The talk time of the last call and cum¬
ulative talk time can be displayed on the readout. The
timers can also be cleared if necessary.
To Display the Talk Time
1.
Press ®, then key ©.
2.
While the key © is held down, the cumulative talk
time will be displayed on the readout in minute
format.
|~i181 'I ... 18 min.
3.
The talk time of the last call will be displayed on the
readout for 5 seconds after the © is released.
While in a conversation, the talk time of a call in
progress will be displayed. The display format is as
follows.
j 8 j ' | ' 18151 ... 1 min. and 25 sec.
Outgoing Call Timer Only
(NAM Option)
Normal call timer operation is to time both the calls
made and the calls received. If the
"outgoing call timer
only"
function is activated (NAM Option), the call timer
will only amount of time when placing calls. It will not
amount of time for calls received.
To Clear the Timer
1.
Press (§), then enter the three-digit security code.
2.
Press
key © then
©. |fl|Q|Q|g| '[will be
displayed for 5 seconds.
The timers will be cleared, and the count for the
cumulative talk time will start from zero.
SID MANAGEMENT
(NAM OPTION)
This feature enables you (by NAM option) to take advan¬
tage of the family of SID groups. This is a group of
cellular systems in cities that your carrier owns or has
special billing arrangements with. Your close family
SID's (like brothers and sisters) will be billed at the same
rate as your home billing and will be indicated as "Home"
(i.e. both IN0SVC1 and
iROAMf
are off) on your display.
More distant family SID's (like cousins) that your
cellular service provider has roaming agreements with
will be displayed as a solid
(ROAM).
When flashing
IROAMl
is displayed, you are using a SID system that is not
included in the NAM assigned groups.
If your display indicates flashing INOSVCI. you will need
to change your A/B switch selection or, please refer to
Multiple City Registration to change phone registration
to enable you to make a call.
If in question as to what SID (system identification) you
are using, push @>, © to display the current SID.
A/B SYSTEM SELECTION
This feature permits you to select the system you need to
use. The system that you are registered with is the
preferred system, and your home system.
When you turn the unit on, the unit remembers the last
position of the A/B system selected, and will start to scan
the radio frequency channels of that selection.
1. Press <©, key ©. The current mode will be displayed.
2. You can change the current mode by pressing
© or © .
©: Scroll upward
(© : Scroll downward
Standard Mode
Home Only Mode
Preferred System Only Mode
Non-preferred System Only Mode
5 t
d
\
H
-
5
y 5|
P
-
5
y s|
n
p
-
s y]i
—
27
28
Advertisement
Table of Contents
