Table of Contents
Advertisement
APPLICANT: TOSHIBA CORPORATION
Volume Control
An Audio Level of the Alert Tone, Earpiese and the Key Tone can be adjusted by the Volume Control
Buttons.
Earpiece: Keep pressing
Alert Tone Level will be displayed on the Readout digitally during the level adjustment and the Sample
Tone will help you to know the Sound Level when not engaged in a Telephone Conversation.
3-2 PLACING TELEPHONE CALLS
To Place a Call
1.
Enter a Telephone Number. Maximumits of the dialed number are displayed on the digital Readout.
2.
If a dialing error is made, press
momentarily (less than approx. 0.5 sec.), only last digit can be cleared. (Last Digit clear)
3.
Press
. The
If a Call Fails to go Through
If you hear the Reorder signal, press
Redial: If the Intercept signal is heard, press
To Terminate a Call
Press
. The
To Receive Calls
When the Telephone rings, press
The
indicator will light.
To Place a Call to a Number in Memory
Pressing
, then enter the Memory Address (01 through 99). If you want to see all number,
press
,
1.
Press
. The
3-3 END TO END SIGNALLING
This feature permits you to utilize some attractive ways of phone, such as Accessing Discounted Long
Distance Network, Signal Pager, or Banking by Phone etc.
For these purposes, the signaling should be in DTMF. ( Touch Tone TM )
3-4 CALL TIME DISPLAY
This Feature automatically counts the Time while the Conversation is being made through your Phone.
Both the Talk Time of the Last Call and Cumulative Talk Time, can be shown on the Readout.
The Memory for Timer can also be cleared if necessary, and you can notice the Talk Time roughly by
Tones on the Phone.
To Display the Talk Time of the Last Call
1.
Press
The
Talk
The
31M
To Display the cumulative Talk Time
or
Button until the moderate Sound Level is got.
then enter the telephone number again. By pressing
indicator will light.
and try again.
indicator will go out.
to answer.
indicator will light, and the Call will be placed.
,
Time
of
the
Last
display
format
25S
...
TRANSCEIVER TYPE: CJ6DCE44941A
and dial the Correct Number.
then
Call
will
be
displayed
is
31
min
,
on
the
Readout.
as
follows.
and
25
.
sec
Advertisement
Table of Contents
