Clutch Plate - Saab 9000 Service Manual

42 Saab Original Service
Cleaning the EGR device
1 Remove and fold back the rubber neck and valve
housing.
2 Remove the EGA pipe and EGA valve.
3 Clean the EGA valve's inlet and outlet
4 Clean the hole in the intake manifold and wipe
off any carbon deposits.
5 Reassemble the parts and fit a new gasket.
6 Check the operation of the EGA device.
Battery
Clean the battery terminals and smear them with
petroleum jelly. Retighten the terminal clamps.
Check the electrolyte level.
Optional work
Clutch plate
Check clutch wear through the inspection hole in
the clutch casing after removing the rectangular
plastic plug.
When the distance between the rear of the plastic
sleeve and the front of the turned surface is less than
2 mm (0.108 in), the clutch plate should be changed.
Saab 9000