Replacing The Carbon Brushes - Bosch GDX18V-1600B12 Operating/Safety Instructions Manual

2610051971.qxp_GDR18V-1400 GDX18V1600 2/11/19 9:07 AM Page 14

REPLACING THE CARBON BRUSHES

Check the length of the carbon brushes
approx. every 2–3 months and replace the
carbon brushes if required.
Never replace only a single carbon brush!
Note: Use only carbon brushes supplied by
Bosch and intended specifically for your
product.
1. Unscrew the caps using a suitable
screwdriver.
2. Replace the spring-loaded carbon brushes
and screw the caps back on again.
Screwdriver bit*
Carrying case*
Belt Clip**
(* standard equipment, ** optional accessories)
BRUSH
Accessories
-14-
FIG. 8
CAP