Connections - RCF S 8019 Owner's Manual

3. CONNECTIONS

Connect the positive wire (amplifier '+' output) to the pin 'IN / OUT +' of the 4-pin SPEAKON connector�
Connect the negative wire (amplifier '–' output) to the pin 'IN / OUT –' of the 4-pin SPEAKON connector�
The 'LINK ONLY +' and 'LINK ONLY –' pins are useful to link another subwoofer in parallel�
The impedance of the subwoofers is 8 Ω (S 8019) and 4 Ω (S 8029)�
WARNING! CAUTION! Loudspeaker connections should be only made by qualified and experienced personnel
having the technical know-how or enough specific instructions (to ensure that connections are made correctly) in order to
prevent any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the amplifier is switched on.
Before turning the system on, check all connections and make sure there are no accidental short circuits.
The entire sound system shall be designed and installed in compliance with the current local laws and regulations regarding
electrical systems.
The entire sound system shall be designed and installed in compliance with the current local laws and regulations regarding
electrical systems.
WARNING! CAUTION! Loudspeakers are to be install by qualified personnel, respecting all safety standards.
Loudspeakers are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical characteristics for the loudspeaker weight,
without the risk of a fall that could damage things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. wall plugs for bricks, for concrete, etc.).
INPUT
THROUGH
7