Yamaha GX-5 Owner's Manual page 19

COMPACT DISC PLAYER OPERATION
To interrupt playback
1 1
Press the play/pause button.
* The " " indicator will flash.
2 2
Press the play/pause button to resume playback from the
same point.
To stop playback
Press the stop button.
To switch the unit off after use
Turn the unit off by pressing the POWER switch. (The
indicators will go off except for the current time display.)
CD/TUNER
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
+
TIME PROG TAPE EDIT I0
DISC SKIP STOP PLAY/PAUSE
MODE REPEAT RANDOM OPEN/CLOSE TUNER
LOCATION PLAY STOP PLAY
TAPE
MUSIC
USER FLAT REC/PAUSE DECK
A/B
POWER SLEEP INPUT VOLUME
+
-
CD/TUNER
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
E
+
I0
Direct operation
Even when an input source other than CD player is selected,
pressing the play/pause button, a disc selector button, a track
number input button or the RANDOM play button, or pressing
the front edge of the disc table gently will start playback
directly. In this case, if the tape deck is playing back a tape,
it will be stopped automatically.
* These ways of playback can also be used to close the disc
table. If the table is closed in these ways, playback will
begin automatically, however, the display will not show the
total number of tracks and the total playing time of the disc
to be played.
PLAYXCHANGE
During playback, you can open the disc table by pressing the
PLAYXCHANGE button without interrupting disc playback.
However, in this case, pressing the DISC SKIP button on the
remote control transmitter has no effect.
Precautions
•
If TV or radio interference occurs during CD player
operation, move the unit away from the TV or radio.
•
Subjecting the unit to shock or vibration can cause
mistracking.
•
Playing some compact discs at high volume can cause
mistracking. In this case, listen at lower volume.
•
Do not pull open the disc table forcibly with your hands.
•
Do not push the disc table while it is moving.
•
If the power fails while the table is open, wait until the
power supply returns or gently push the table manually to
close it.
•
The temperature range for playing compact discs is
recommended to be 5°C (41°F) – 35°C (95°F).
Direct-selection play
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played directly.
Use the track number input buttons to select the desired
track number. Play will begin automatically.
A. For example, to choose selection 5
Press the "5" button.
B. For example, to choose selection 12
(1) Press the "+10" button.
(2) Within 3 seconds, press "2" button.
C. For example, to choose selection 20
(1) Press the "+10" button.
(2) Within 3 seconds, press the "+10" button again.
(3) Within 3 seconds, press the "0" button.
Note
A track number higher than the number of tracks on the disc
cannot be selected. Also, if a higher track number is selected
while the disc table is open, play will begin from the last track
on the disc when the disc table is closed.
11