Yamaha GX-5 Owner's Manual page 43

GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR CONTROL
2 1 1
4, 2 3, 5
CD/TUNER
1 2
1 2
6 7
6 7
A B
TIME PROG
2
DISC SKIP
MODE REPEAT
LOCATION
1
MUSIC
USER
POWER SLEEP
4, 2 2
USER
1
2
3
4
3 4 5
3 4 5
8
8 9 0
C D E
+
TAPE EDIT I0
1
STOP PLAY/PAUSE
RANDOM OPEN/CLOSE TUNER
PLAY STOP PLAY
TAPE
FLAT REC/PAUSE DECK
A/B
INPUT VOLUME
+
-
Storing your own programs
Your favorite pair of any equalizer mode (or an equalizer
pattern of your own adjusting) and any sound field mode can
be stored as a user program. Up to 4 pairs can be stored as
desired.
To store
1
Select a desired equalizer mode by pressing the MUSIC
button.
* If desired, adjust the equalizer as you prefer by using
the equalizer control buttons.
2
Select a desired sound field mode by pressing the
LOCATION button.
3
Press the user program MEMORY button.
* "1" will flash on the user program number indicator and
the MEMORY indicator will flash for about 5 seconds.
4
Select the user program number (1, 2, 3 or 4) to which
you will store the selected modes by pressing the USER
button once or more before "1" stops flashing.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1
5
Press the user program MEMORY button before the
number selected in step 4 stops flashing.
* In the same way, store other pairs to other three user
positions.
* It is also a good idea to store only an equalizer pattern of
your own adjusting (without storing any sound field mode).
Notes
•
A new program can be stored in place of the former one.
•
In step 4 or 5, if the user program number indicator stops
flashing before operation, return to step 3.
To recall a user program
1 1
Playback a source. (For source playback, refer to the
sections beginning on page 10.)
2 2
Press the USER button once or more so that the user
program number you want to recall lights up.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1 USER 2
35
USER 2 USER 3
USER 4
USER 3 USER 4
OFF