Yamaha GX-5 Owner's Manual page 34

RECORDING COMPACT DISCS
B C
4
5
CD/TUNER
1 2
1 2
6 7
6 7
A B
TIME PROG
2
DISC SKIP
MODE REPEAT
LOCATION
MUSIC
USER
POWER SLEEP
1
6 1
1
3
6
3 4 5
3 4 5
8
8 9 0
C D E
+
TAPE EDIT I0
1
STOP PLAY/PAUSE
RANDOM OPEN/CLOSE TUNER
PLAY STOP PLAY
TAPE
FLAT REC/PAUSE DECK
A/B
INPUT VOLUME
+
-
Recording CD(s) on both sides of
a tape automatically
1
Press the CD input selector button and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the DECK B cassette compartment.
4
When recording with the Dolby NR system, select the
Dolby NR B or C position by pressing the DOLBY NR
button. If not, set it off.
* For selection of the Dolby B or C position, refer to the
"Dolby B and C Type Noise Reduction" on page 23.
5
If the reverse mode "
reverse MODE selector button to select it.
6
Press the EDIT button. ("EDIT" appears on the display.)
CD playback and recording starts. Recording is carried
out on side A and B of the tape continuously.
* If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
Recording starts from the first part of the tape on which
recording can be done.
* "A " (or "
the tape on which recording is being carried out.
* When the recording on side A finishes while a track is
being played back, the sound is automatically faded
out, and then the recording stops.
The recording on side B starts from the beginning of
the same track.
Notes
•
When this CD player is in the all disc play mode, if the
tape's total possible recording time is longer than the total
playing time of the selected disc, tracks on another disc
are recorded continuously.
In this case, as many as three discs can be recorded
automatically.
•
During recording, the PLAYXCHANGE button on the CD
player is disabled.
•
The CD player's repeat play mode will be canceled during
this recording mode.
Recording programmed tracks
Programmed tracks from one or more discs can also be
recorded in the same way.
1 1
Program desired tracks from one or more discs. (Refer to
page 13 for the programming procedure.)
2 2
Follow steps 3–6 described above.
To cancel this function
Before recording, press the stop
or the tape deck.
To stop recording
Press the stop button of the tape deck.
(At this time, CD playback automatically stops.)
26
" is not selected, press the
B") on the display shows the side of
button of the CD player