Download
Share
Print this page
  1. Manuals
  2. Brands
  3. airmet Manuals
  4. Cash Counter
  5. AirMetER-DX
  6. Setup manual

airmet AirMetER-DX Setup Manual

Easylog ethernet
Hide thumbs Also See for AirMetER-DX:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
AirMetER-DX
EASYLOG
ETHERNET SETUP GUIDE
Revision | June 2023
Air-Met Scientific

Advertisement

loading
Need help?

Need help?

Do you have a question about the AirMetER-DX and is the answer not in the manual?

Questions and answers

Related Manuals for airmet AirMetER-DX

Summary of Contents for airmet AirMetER-DX

  • Page 1 AirMetER-DX EASYLOG ETHERNET SETUP GUIDE Revision | June 2023 Air-Met Scientific...

  • Page 2: Layout Overview

    LAYOUT OVERVIEW Air-Met Scientific...
  • Page 3 ETHERNET SETUP Connecting to the ethernet can be done in two ways: a. Connecting the ethernet cable into the WAN/LAN port of the modem b. Connecting directly into the logger. This is recommended for bypassing any issue that can occur when transferring the data.
  • Page 4 ETHERNET SETUP A gland or port is needed to have the ethernet connected from the logger to external LAN connection. If instrument was purchased with the ethernet connection option, it will have been assembled with the external RJ45 connection port. If it’s an after sales, it won’t have the external port.
  • Page 5 ETHERNET SETUP The device must be within the same network as Easylog. Open your browser and type in 192.168.1.100 The Easylog login page will load Username: admin Password: 711CeylonStreet Air-Met Scientific...
  • Page 6 ETHERNET SETUP Navigate to Configuration > Network Enable DHCP unless logger is set as static on the network. 10. IP address and IP gateway can be set depending on the network it will be connected to. Air-Met Scientific...

  • Page 7: Ethernet Setup

    ETHERNET SETUP 11. Navigate to Configuration > Clock Enable NTP. This will allow the logger to update the time • from the network Air-Met Scientific...
  • Page 8 ETHERNET SETUP 12. Navigate to Configuration > File logger Set the FTP settings for where the data • will be sent through. If Livesense platform will be used, then • leave the settings as they will have been configured prior to shipment. 13.

  • Page 9: Need Help

    If you have any questions or require troubleshooting while using this guide, our team are here to assist you. Please feel free to contact us at any of the following means: 1800 000 744 engineeredsolutions@airmet.com.au www.airmet.com.au CONTACT US Alternatively, scan the QR code to locate your nearest Air-Met Scientific office.