Page 3
WI-FI SETUP To remove the modem from the DIN rail, Connect ethernet cable to either LAN push the modem vertically to compress the or WAN/LAN, whichever is available. mount clip and tilt the top of the modem down towards yourself to release it from the rail.
Page 4
WI-FI SETUP Ensure your IP assignment settings are set to Automatic. Open your browser and navigate http://192.168.1.1 The Four-Faith modem login page will load. Username: admin Password: 711CeylonStreet Air-Met Scientific...
Page 5
WI-FI SETUP Navigate to Wireless under Status and click Navigate to Setup > Basic Setup Site Survey Ensure either the WAN Connection Type or Bkup WAN Connection Type are set to Automatic configuration – DHCP with the settings as shown Air-Met Scientific...
Page 6
WI-FI SETUP Click Join on the network you wish to use, then click continue. The Wireless page will pop up, simply select save. Air-Met Scientific...
Page 7
WI-FI SETUP 10. Navigate to Wireless Security under Wireless. 11. Enter the Wi-Fi network’s password in the WPA Shared Key section. 12. Click Save. 13. Navigate to WAN page under Status and verify that the modem is connected to the network.
If you have any questions or require troubleshooting while using this guide, our team are here to assist you. Please feel free to contact us at any of the following means: 1800 000 744 engineeredsolutions@airmet.com.au www.airmet.com.au CONTACT US Alternatively, scan the QR code to locate your nearest Air-Met Scientific office.
Need help?
Do you have a question about the AirMetER-DX and is the answer not in the manual?
Questions and answers