Table of Contents
Advertisement
moulded plastic flange and sealing cap. They ar e fitted over the inlet inside the canister
and the dust/debris is collected inside the bag. The sealing cap is designed to prevent the
escape of dust from the bag during the bag change and disposal process. When the bag
is full or suction efficiency is impaired, it should be replaced. Microfibre bags are not
designed to be emptied and should not be reused.
2nd stage: Antistatic Cloth Filter Assembly Part No. K25.03.01
2)
A conductive needlefelt cloth filtration media attached to a conductive rubber sealing ring
and supported by a conductive plastic rigid filter frame.
3rd stage: H14 Grade HEPA (High Efficiency Particulate Air) Cartridge Filter
3)
Part No. K27.04.02
Often referred to as the essential or absolute filter. It is designed to filter to a very fine particle
size (0.3-0.6micron at an efficiency >99.995%) yet have a large enough surface area to give
maximum vacuum performance.
Note
The casing of the HEPA filter is metal and is earth bonded to the body of the vacuum
cleaner to dissipate any static built up in the HEPA filter.
WARNING: Do not use this vacuum cleaner unless the full 3 stage filtration system is fitted .
Cooling Air
The electrical and electronic parts of the vacuum motor are protected against potentially
flammable/ explosive dust ingress by HEPA filters. The HEPA filter situated on the top of
the motor head filters the inlet cooling air. The exhaust outlet cooling air HEPA filter is
situated within the motor head.
PERFORMANCE
The machine performance is noted below:
Voltage
(v)
110
230
LOSS OF SUCTION AND THERMAL SWITCH
If your cleaner loses suction power, first check that the hose and other accessories in use
are not blocked. To clear a blockage, insert a long object such as a wooden spoon into the
nozzle connector to clear the airway.
If the hose or accessories are not blocked, then check that the filtration system is not
blocked. The filtration system can be serviced as follows:
Max Airflow:
56lr/s /
200M³/Hr
59lr/s / 210
M³/Hr
9
Max Vacuum:
2100mm H
0 / 206
2
hPa
2300mm H
0 / 225
2
hPa
Advertisement
Table of Contents
