3. Hot surface ignition sensitivity (layer)
4. Explosion severity
5. Burning behaviour
6. Thermal instability
7. Chemical instability
8. Static electricity generation
9. Impact of collected material
10. The ATEX certification code for the appliance being assessed (see the rating plate on the
machine).
CARRYING & STORAGE
The assembled cleaner can be moved around by pulling the vacuum hose, using the
flip/flop handle on the motor head or by means of the tubular handle (models on caddy
only). It must NOT be dragged around by means of the power supply cable.
When not in use this vacuum cleaner should be disconnected from the power supply. This
vacuum cleaner should be stored indoors in a dry environment.
OPERATING INSTRUCTIONS
Unscrew the blanking cap from the threaded hose entry. Connect the hose and
•
accessories required.
Insert the mains plug into a suitable socket outlet.
•
Switch on the unit by turning the ON/OFF switch from '0' to '1'
•
When this unit needs to be switched off it must only be switched off (or on) using the
•
ON/OFF switch.
When coiling the mains cable make sure that any twists or knots in the cable come
•
out at the plug end. DO NOT coil the cable from the plug end as all twists and
knots remain in the cable and considerably shorten its life.
FILTRATION SYSTEM
This vacuum cleaner is fitted with two separate air filtration systems. The first is for the
working air. That is the airflow created by the motor to transport dust/debris up the hose
and into the disposable bag. The second is for the cooling air. That is the airflow created
by the motor to keep its temperature within acceptable limits.
Working Air
1st stage: K4 Microfibre disposable bag – KEVA 20, 30 & 45 Part No. K18.01.02
1)
The K4 Microfibre disposable bag is made from Microfibre material. This material offers
better filtration efficiency, greater tear resistance from sharp debris, and is less likely to
burst when full of heavy dust/ debris. K4 Microfibre disposable bags are fitted with a
8